Aro SIL Soft

Get a Price/Quote

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

DESCRIPTION:

AROSIL SOFT is composition Polysiloxane compound, non-ionic/weakly cationic.
Its durable softener for all fiber types with high .inner softness and resilience.

PROPERTIES:

PRODUCT	Polysiloxane compound.
APPEARANCE	Clear, colourless to yellowish liquid ( macro emulsion)
PH	5.0-6.0
NATURE	Non-ionic/ weakly cationic.
COMPATIBITY	Resistant to hard water and easily dilatable with cold water in any ratio.
SPECIFICGRAVITY	20*Cca. 1.0 g/cm3

FEATURES:

Confersa very soft, supple handle with wellness factor.
Increases the resilience significantly
Improves crease recovery and self-smoothing properties
Low tendency to yellowing even at high drying/curing temperatures
Excellent durability to washing
Application in slightly acid medium
Not compatible with alkalis
Resistant to electrolytes, compatible with resin finishing agents
Suitable for the padding or exhaust method (not jet-stable)

APPLICATION:

FOR Padding Exhaust Method
20- 40 g/l AROSIL SOFT 0.5- 2 % AROSIL SOFT(W.O.F)
Liquor pick-up 60-80% PH: 4.5 - 5.5 ( acetic)
Drying Temperature: 130-150°C Time:20 min & Temperature : 40°C
Drying Temperature: 130-150°C

NOTE: The product is not suitable for applications in machines with high shear forces (Jet dyeing machine) Run compatibility tests before using AROSIL SOFT with other finishing agents (combination recipes).

PROCESS:

It is used for finishing woven or knitted garments, for which an especially soft surface, resilient handle is required. Suitable for resin finishing.
It is preferably applied in can be used by the exhaust and padding method in machines with low liquor turbulence. It is not jet-stable.
In principle, when using silicone softeners, scour, rinse and acidify the fabric thoroughly after pretreatment to remove residual substances (anionic substances, size, etc.), which may cause liquor instabilities.
Dilute it with cold water and use it in a weakly acid medium. Adjust the pH value of the liquor with monobasic acids (eg acetic acid. do not use formic acid) to 4.5 - 5.5. Avoid applications in alkaline medium. Residual alkali on the fabric or alkaline plant water may significantly destabilize the liquor and cause silicone precipitations.

STORAGE:

If stored below 0 °C, the product may solidify and/or change its consistency. After heating to 20 - 25 °C and thorough mixing, the product can be used again without any problems.
The product is sensitive to heat and must not be stored at temperatures above 40 °C. Irreparable damage is possible. If stored too warm, the usability of the product has to be checked before processing.
In the case of prolonged storage, the product may more or less yellow. This is due to raw material fluctuations and cannot be influenced by production technique. However, the degree of whiteness and other properties of the finished textile will not be affected.
Disclaimer: The said information is provided with good faith. However, our technical advice, information and statements given verbally, in writing or in form of test results is offered for guidance without warranty.NO WARRANTY OF FITNESS FOR A PARTICULAR URPOSE IS MADE. The user is requested to conduct a small trial of the product prior to the bulk use.